-
Shower Tent // Outhouse
$995.00 Exc. Freight & TaxesThe Outhouse from Navigator Outdoor provides a perfect solution for privacy when showering, using the toilet, or just getting changed.
The drop height is adjustable making it perfect for almost any height vehicle.
Easy to set up and pack down, the Outhouse has a range of great features that set it apart from the rest.
- 260gsm polyester rip stop acrylic infused, mould and mildew resistant canvas.
- Unique swing out door allows easy access.
- Built in canvas roof and adjustable webbing straps to adjust drop height.
- Separate heavy duty PVC floor with built in drain holes.
- Large rear access.
- Two movable pockets for shampoo bottles etc.
- Heavy duty PVC storage bag.
- YKK zips on shower entrance and bag.
The Outhouse can be easily mounted to roof racks using our Low Profile L Bracket, or to the side of your rooftop tent using the Outhouse To Tent Bracket. These brackets must be ordered separately as they are not included with the Outhouse.
-
SIDE DROP SLIDE-DS45
$1,295.00 Exc. Freight & TaxesThe SIDE DROP SLIDE-DS45 is the perfect addition to a 4WD set-up. Offering unrestricted access at a safe and convenient level to a fridge, toolbox or generator. The SIDE DROP SLIDE-DS45 includes a slimline handle allowing for the Slide to lower 30 centimetres while extending over the vehicle’s tailgate. The platform remains perfectly horizontal and avoids any contact with the vehicle. A blue anodised faceplate creates a tough, durable and easily recognisable feature, that is unique to all MSA 4X4 Slides. The frame is constructed from powder-coated steel and the compact design maximises storage space within the vehicle. The MSA 4X4 SIDE DROP SLIDE-DS45 is engineered to be easily installed and the pre-drilled tray holes provide anchor points for most popular fridges. The lock-in, lock-out safety feature locks the slide in its intended position while travelling, preventing potential damage to the fridge and vehicle.
-
SIDE DROP SLIDE-DS50
$1,379.95 Exc. Freight & TaxesThe SIDE DROP SLIDE-DS50 designed for specific applications where the Drop Slide™ is better suited sideways, as the vehicle does not have enough depth for a standard Drop Slide™ to be installed.
The MSA 4X4 SIDE DROP SLIDE-DS50 offers unrestricted access at a safe and convenient level to a fridge, toolbox or generator. The SIDE DROP SLIDE-DS50 includes a slimline handle allowing for the Slide to lower 30 centimetres while extending over the vehicle’s tailgate. The platform remains perfectly horizontal and avoids any contact with the vehicle. A blue anodised faceplate creates a tough, durable and easily recognisable feature, that is unique to all MSA 4X4 Slides. The frame is constructed from powder-coated steel and the compact design maximises storage space within the vehicle. The MSA 4X4 SIDE DROP SLIDE-DS50 is engineered to be easily installed and the pre-drilled tray holes provide anchor points for most popular fridges. The lock-in, lock-out safety feature locks the slide in its intended position while travelling, preventing potential damage to the fridge and vehicle.
-
SIDE DROP SLIDE-DS60
$1,395.00 Exc. Freight & TaxesThe SIDE DROP SLIDE-DS60 designed for specific applications where the Drop Slide™ is better suited sideways, as the vehicle does not have enough depth for a standard Drop Slide™ to be installed.
The MSA 4X4 SIDE DROP SLIDE-DS60 offers unrestricted access at a safe and convenient level to a fridge, toolbox or generator. The SIDE DROP SLIDE-DS60 includes a slimline handle allowing for the Slide to lower 30 centimetres while extending over the vehicle’s tailgate. The platform remains perfectly horizontal and avoids any contact with the vehicle. A blue anodised faceplate creates a tough, durable and easily recognisable feature, that is unique to all MSA 4X4 Slides. The frame is constructed from powder-coated steel and the compact design maximises storage space within the vehicle. The MSA 4X4 SIDE DROP SLIDE-DS60 is engineered to be easily installed and the pre-drilled tray holes provide anchor points for most popular fridges. The lock-in, lock-out safety feature locks the slide in its intended position while travelling, preventing potential damage to the fridge and vehicle.
-
Sirocco 12V Fan Mount Plate (LX27)
$27.00 Exc. Freight & TaxesThe Sirocco 12V Fan Mount Plate is a great way to mount a Sirocco fan to your LX27 rooftop tent.
The Bush Company USA Sirocco 12V Fan Mount Plate can be easily attached (all mounting hardware is provided) to pre-installed rivnuts in the beams
of the roof of The Bush Company USA <strong>LX27 rooftop tents.</strong> The Scirocco fan can then be easily slid into place when required and
removed when the tent is to be closed leaving.. The mount plate also provides a place to mount your tents magnetic tri-colour rechargeable light.The Scirocco Fan is sold separately at leading RV stores and online.
-
Solar Cable Protector
$32.00 Exc. Freight & TaxesThe Solar Cable Protector provides the perfect solution to protect your solar panel wiring from damage or getting caught on tree branches in the bush.
The Solar Cable Protector has been designed to mount easily to the hinged end of your Navigator Outdoor Rooftop tent on either side.
-
Solar Panel Bracket (AX27, DX27)
$125.00 Exc. Freight & TaxesIf you’re looking to mount solar panels on the roof of your tent, the Solar Panel Bracket is an ideal solution. Constructed from stainless steel with a black powder-coat finish and sold as a pair, the brackets mount to the rails running along the roof and are designed to securely hold your solar panels in place.
For mounting your panels, all you need to do drill holes into the frame of your panels for the rivets, which are supplied with the bracket. Additionally, the bracket ensures that there is still air circulation underneath the panel, helping to maintain the panel’s output efficiency.
NOTE: these brackets only suit the AX27 and DX27 rooftop tents, not the TX27 or TX27 MAX.
-
Solar Panel To Load Bar Bracket Set
$58.95 Exc. Freight & TaxesThe Solar Panel To Load Bar Bracket Sett is perfect for mounting solar panels to your adjustable load bars on your rooftop tent.
The brackets mount securely to Navigator Outdoor load bar and you then secure your panel to the bracket using the pop rivets provided with the bracket.
The Solar Panel To Load Bar Bracket Set is suitable for use with our Adjustable Load Bar that mount to the side of your Navigator Outdoor tent, or can be used with our standard Rooftop Tent Load Bars but require them to have the High Foot Mount fitted. fitted
-
Spring Rod Adapter
$32.00 Exc. Freight & TaxesThe Spring Rod Adapter mounts to the Navigator Outdoor’s Tent To Awning Bracket for tents that have that have the ‘Ezi-Slot’ channels built into the frame. Spring Rod Adapter bracket only required if the tent to awning bracket is mounted pointing upwards – usually done to avoid the vehicle doors from rubbing on the awning bag.
The Spring Rod Adapter is made from stainless steel in a powder coat black finish to match the rooftop tents. The bracket is supplied with stainless steel M8 pan head bolts and nyloc nuts and comprehensive fitting instructions.
The adapter is available in a left and right hand version.
-
Straight Slide Clip-On Table With Cutlery Roll
$179.95 Exc. Freight & TaxesCREATE A USEFUL FOOD PREPARATION AREA IN A COUPLE OF QUICK STEPS
When camping, space can often be at a premium. The MSA 4X4 Straight Slide Clip-On Table With Cutlery Roll, makes a perfect addition to your MSA 4X4 Straight Slide™.
Great for preparing a quick meal, a place to hold a cold drink or just as a handy table, when out and about exploring the great outdoors. The Straight Slide Clip-On Table With Cutlery Roll is quick to set up and comfortably stores away within an MSA 4X4 Storage Drawer System. The durable canvas Cutlery Roll easily attaches to the front edge of the Straight Slide Clip-On Table, keeping cutlery and other cooking utensils within easy reach. A convenient Velcro side pocket provides a suitable space for a 380mm x 290mm cutting board. Cutting directly onto the Clip-On Table is not advisable, use of a cutting board is recommended. The durable powder-coated surface is easily cleaned after use and stows away into its own protective storage case Designed to fit all MSA 4X4 and Straight Slides.
-
STRAIGHT SLIDE-SL40
$649.95 Exc. Freight & TaxesMSA 4X4’s STRAIGHT SLIDE-SL40 provides simple, easy and convenient access to your fridge.
The STRAIGHT SLIDE-SL40 is designed to suit vehicle rear setups already at a low height. The slide extends smoothly out past your vehicle’s tailgate or rear bar, remaining in a horizontal position. Its flat mounting base assists in allowing for a quick and easy installation.
The STRAIGHT SLIDE-SL40 features over-extension roller bearings which allow for maximum slide extension while maintaining an incredible 200kg slide runner rating. No longer will you need to climb into your vehicle or lift a heavy fridge in and out of the car to access its contents!
The Straight Slides also includes a unique lock-in lock-out safety feature, as well as a key lock and tie-downs to ensure paramount safety both when operating the slide and whilst travelling.
-
STRAIGHT SLIDE-SL45
$649.95 Exc. Freight & TaxesThe MSA 4X4 STRAIGHT SLIDE-SL45 is a simple, versatile yet convenient solution to accessing the fridge contents.
The STRAIGHT SLIDE-SL45 is designed to suit vehicle rear setups already at a low height. The slide extends smoothly out past your vehicle’s tailgate or rear bar, remaining in a horizontal position. Its flat mounting base assists in allowing for a quick and easy installation.
The STRAIGHT SLIDE-SL45 features over-extension roller bearings which allow for maximum slide extension while maintaining an incredible 200kg slide runner rating. No longer will you need to climb into your vehicle or lift a heavy fridge in and out of the car to access its contents!
The Straight Slides also includes a unique lock-in lock-out safety feature, as well as a key lock and tie-downs to ensure paramount safety both when operating the slide and whilst travelling.
-
STRAIGHT SLIDE-SL50
$695.00 Exc. Freight & TaxesThe MSA 4X4 STRAIGHT SLIDE-SL50 is a simple, versatile yet convenient solution to accessing the fridge contents.
The STRAIGHT SLIDE-SL50 is designed to suit vehicle rear setups already at a low height. The slide extends smoothly out past your vehicle’s tailgate or rear bar, remaining in a horizontal position. Its flat mounting base assists in allowing for a quick and easy installation.
The STRAIGHT SLIDE-SL50 features over-extension roller bearings which allow for maximum slide extension while maintaining an incredible 200kg slide runner rating. No longer will you need to climb into your vehicle or lift a heavy fridge in and out of the car to access its contents!
The Straight Slides also includes a unique lock-in lock-out safety feature, as well as a key lock and tie-downs to ensure paramount safety both when operating the slide and whilst travelling.
-
STRAIGHT SLIDE-SL60
$695.00 Exc. Freight & TaxesThe MSA 4X4 STRAIGHT SLIDE-SL60 is a simple, versatile yet convenient solution to accessing the fridge contents.
The STRAIGHT SLIDE-SL60 is designed to suit vehicle rear setups already at a low height. The slide extends smoothly out past your vehicle’s tailgate or rear bar, remaining in a horizontal position. Its flat mounting base assists in allowing for a quick and easy installation.
The STRAIGHT SLIDE-SL60 features over-extension roller bearings which allow for maximum slide extension while maintaining an incredible 200kg slide runner rating. No longer will you need to climb into your vehicle or lift a heavy fridge in and out of the car to access its contents!
The Straight Slides also includes a unique lock-in lock-out safety feature, as well as a key lock and tie-downs to ensure paramount safety both when operating the slide and whilst travelling.
-
STRAIGHT SLIDE-SL95
$799.95 Exc. Freight & TaxesThe MSA 4X4 STRAIGHT SLIDE-SL95 is a simple, versatile yet convenient solution to accessing the fridge contents.
The STRAIGHT SLIDE-SL95 is designed to suit vehicle rear setups already at a low height. The slide extends smoothly out past your vehicle’s tailgate or rear bar, remaining in a horizontal position. Its flat mounting base assists in allowing for a quick and easy installation.
The STRAIGHT SLIDE-SL95 features over-extension roller bearings which allow for maximum slide extension while maintaining an incredible 200kg slide runner rating. No longer will you need to climb into your vehicle or lift a heavy fridge in and out of the car to access its contents!
The Straight Slides also includes a unique lock-in lock-out safety feature, as well as a key lock and tie-downs to ensure paramount safety both when operating the slide and whilst travelling.
-
Strap Hook Bracket
$29.95 Exc. Freight & TaxesThe Strap Hook Bracket is designed to mount to the side of Navigator Outdoor rooftop tents that have ezi-slot channels in the side of the frame. The bracket provides a low profile, convenient point to attach awning straps when deploying your awning.
The Strap Hook Bracket is made from stainless steel in a powder coat black finish to match the rooftop tents. The bracket is supplied with stainless steel M8 pan head bolts and nyloc nuts and comprehensive fitting instructions.
