-
Deluxe Toiletry Travel Bag
$110.00 Exc. Freight & TaxesDeluxe Toiletry Travel Bag is the perfect versatile travel companion, use as a large toiletry bag or as a combined travel and toiletry bag for short trips. Made from high quality 320gsm canvas with YKK zips, the Deluxe Toiletry Travel Bag has two large main sections each with air/drain mesh down both sides. One side is design to hold toiletries and has 4 large zippered compartments (two clear plastic and two mesh) and a small vanity mirror, while the other side can be used for storing clothes, towels or swimming togs. There is a large zippered flat pouch on the front and a sturdy metal hook on the rear enabling you to hang the bag on doors etc. as well as very strong webbing carry handles.
- 320g Rip Stop Canvas
- High Quality YKK Zips
- Metal hook for hanging
- One compartment for toiletries with 4 seperate pouches
- One large compartment for clothes
- Mirror
Check out the product review video to see this great product for yourself.
-
Drop Slide Clip-On Table With Cutlery Roll
$155.00 Exc. Freight & TaxesCREATE A USEFUL FOOD PREPARATION AREA IN A COUPLE OF QUICK STEPS
When camping, space can often be at a premium. The MSA 4X4 Drop Slide Clip-On Table With Cutlery Roll, makes a perfect addition to your MSA 4X4 Drop Slide™.
Great for preparing a quick meal, a place to hold a cold drink or just as a handy table, when out and about exploring the great outdoors. The Drop Slide Clip-On Table is quick to set up and comfortably stores away within an MSA 4X4 Storage Drawer System. The durable canvas Cutlery Roll easily attaches to the front edge of the Drop Slide Clip-On Table, keeping cutlery and other cooking utensils within easy reach. A convenient Velcro side pocket provides a suitable space for a 380mm x 290mm cutting board. Cutting directly onto the Clip-On Table is not advisable, use of a cutting board is recommended. The durable powder-coated surface is easily cleaned after use and stows away into its own protective storage case Designed to fit all MSA 4X4 Drop Slides™.
-
DROP SLIDE-DS40
$915.00 Exc. Freight & TaxesThe DROP SLIDE-DS40 is perfect for preparing a quick meal for the family when on the road. The DROP SLIDE-DS40 lowers 30 centimetres while extending over the tailgate of the vehicle, allowing easy access to a fridge, toolbox or generator. The slide remains in a horizontal position when lowing, avoiding any contact with the vehicle. The Slide also has a powder-coated steel frame construction for more durability when in use. The lock-in, lock-out safety feature locks the slide in its intended position while travelling, preventing potential damage to the fridge and vehicle.
-
DROP SLIDE-DS40 With Table
$1,245.00 Exc. Freight & TaxesMSA 4X4 has taken it up a notch with the MSA 4X4 DROP SLIDE-DS40 With Table. This patented Drop Slide™ comes with a 316 stainless-steel pull-out table that can hold up to 16.5lbs/7.5kg.
Perfect for preparing a quick meal for the family when on the road. The DROP SLIDE-DS40 With Table lowers 30 centimetres while extending over the tailgate of the vehicle, allowing easy access to a fridge, toolbox or generator. The slide remains in a horizontal position when lowing, avoiding any contact with the vehicle. The DROP SLIDE-DS40 With Table features the unique, easily recognisable, MSA 4X4 blue anodised faceplate. Creating a tough, durable and sleek finish, it is sure to stand out from its competitors. The Slide also has a powder-coated steel frame construction for more durability when in use. The lock-in, lock-out safety feature locks the slide in its intended position while travelling, preventing potential damage to the fridge and vehicle.
-
DROP SLIDE-DS45
$935.00 Exc. Freight & TaxesUsing the slimline handle, the DROP SLIDE-DS45 lowers 30 centimetres while extending out further over the tailgate. This happens in one safe, smooth, controlled motion. At the same time, the platform remains in a perfectly horizontal position and avoids contact with the vehicle. The unique MSA 4X4 blue anodised faceplate provides a tough, durable and easily recognisable finish. The frame is constructed from powder-coated steel and the compact design maximises storage space within the vehicle. The MSA 4X4 Drop Slide™ is engineered to be easily installed and the pre-drilled tray holes provide anchor points for most popular fridges. The lock-in, lock-out safety feature locks the slide in its intended position while travelling, preventing potential damage to the fridge and vehicle.
-
DROP SLIDE-DS45 With Table
$1,345.00 Exc. Freight & TaxesMSA 4X4 has taken it up a notch with the MSA 4X4 DROP SLIDE-DS45 With Table. This patented Drop Slide™ comes with a 316 stainless-steel pull-out table that can hold up to 16.5lbs/7.5kg.
Using the slimline handle, the DROP SLIDE-DS45 With Table lowers 30 centimetres while extending out further over the tailgate. This happens in one safe, smooth, controlled motion. At the same time, the platform remains in a perfectly horizontal position and avoids contact with the vehicle. The unique MSA 4X4 blue anodised faceplate provides a tough, durable and easily recognisable finish. The frame is constructed from powder-coated steel and the compact design maximises storage space within the vehicle. The MSA 4X4 DROP SLIDE-DS45 With Table is engineered to be easily installed and the pre-drilled tray holes provide anchor points for most popular fridges. The lock-in, lock-out safety feature locks the slide in its intended position while travelling, preventing potential damage to the fridge and vehicle.
-
DROP SLIDE-DS50
$970.00 Exc. Freight & TaxesThe patented DROP SLIDE-DS50 is designed to provide unrestricted access to a fridge, toolbox or generator at a safe, convenient level.
Using the slimline handle, the DROP SLIDE-DS50 lowers 30 centimetres while extending out further over the tailgate. This happens in one safe, smooth, controlled motion. At the same time, the platform remains in a perfectly horizontal position and avoids contact with the vehicle. The unique MSA 4X4 blue anodised faceplate provides a tough, durable and easily recognisable finish. The frame is constructed from powder-coated steel and the compact design maximises storage space within the vehicle. The MSA 4X4 DROP SLIDE-DS50 is engineered to be easily installed and the pre-drilled tray holes provide anchor points for most popular fridges. The lock-in, lock-out safety feature locks the slide in its intended position while travelling, preventing potential damage to the fridge and vehicle.
-
DROP SLIDE-DS50 With Table
$1,375.00 Exc. Freight & TaxesMSA 4X4 has taken it up a notch with the MSA 4X4 DROP SLIDE-DS50 With Table. This patented Drop Slide™ comes with a 316 stainless-steel pull-out table that can hold up to 16.5lbs/7.5kg.
Perfect for preparing a quick meal for the family when on the road. The DROP SLIDE-DS50 With Table lowers 30 centimetres while extending over the tailgate of the vehicle, allowing easy access to a fridge, toolbox or generator. The slide remains in a horizontal position when lowing, avoiding any contact with the vehicle. The DROP SLIDE-DS50 With Table features the unique, easily recognisable, MSA 4X4 blue anodised faceplate. Creating a tough, durable and sleek finish, it is sure to stand out from its competitors. The Slide also has a powder-coated steel frame construction for more durability when in use. The lock-in, lock-out safety feature locks the slide in its intended position while travelling, preventing potential damage to the fridge and vehicle.
-
DROP SLIDE-DS60
$1,025.00 Exc. Freight & TaxesThe patented DROP SLIDE-DS60 is designed to provide unrestricted access to a fridge, toolbox or generator at a safe, convenient level.
Using the slimline handle, the DROP SLIDE-DS60 lowers 30 centimetres while extending out further over the tailgate. This happens in one safe, smooth, controlled motion. At the same time, the platform remains in a perfectly horizontal position and avoids contact with the vehicle. The unique MSA 4X4 blue anodised faceplate provides a tough, durable and easily recognisable finish. The frame is constructed from powder-coated steel and the compact design maximises storage space within the vehicle. The MSA 4X4 DROP SLIDE-DS60 is engineered to be easily installed and the pre-drilled tray holes provide anchor points for most popular fridges. The lock-in, lock-out safety feature locks the slide in its intended position while travelling, preventing potential damage to the fridge and vehicle.
-
DROP SLIDE-DS60 With Table
$1,385.00 Exc. Freight & TaxesMSA 4X4 has taken it up a notch with the MSA 4X4 DROP SLIDE-DS60 With Table. This patented Drop Slide™ comes with a 316 stainless-steel pull-out table that can hold up to 16.5lbs/7.5kg.
Perfect for preparing a quick meal for the family when on the road. The DROP SLIDE-DS60 With Table lowers 30 centimetres while extending over the tailgate of the vehicle, allowing easy access to a fridge, toolbox or generator. The slide remains in a horizontal position when lowing, avoiding any contact with the vehicle. The DROP SLIDE-DS60 With Table features the unique, easily recognisable, MSA 4X4 blue anodised faceplate. Creating a tough, durable and sleek finish, it is sure to stand out from its competitors. The Slide also has a powder-coated steel frame construction for more durability when in use. The lock-in, lock-out safety feature locks the slide in its intended position while travelling, preventing potential damage to the fridge and vehicle.
-
DROP SLIDE-DS95
$1,075.00 Exc. Freight & TaxesThe patented DROP SLIDE-DS95 is designed to provide unrestricted access to a fridge, toolbox or generator at a safe, convenient level.
Using the slimline handle, the DROP SLIDE-DS95 lowers 30 centimetres while extending out further over the tailgate. This happens in one safe, smooth, controlled motion. At the same time, the platform remains in a perfectly horizontal position and avoids contact with the vehicle. The unique MSA 4X4 blue anodised faceplate provides a tough, durable and easily recognisable finish. The frame is constructed from powder-coated steel and the compact design maximises storage space within the vehicle. The DROP SLIDE-DS95 is engineered to be easily installed and the pre-drilled tray holes provide anchor points for most popular fridges. The lock-in, lock-out safety feature locks the slide in its intended position while travelling, preventing potential damage to the fridge and vehicle.
-
DX27 Clamshell Rooftop Tent
Original price was: $3,995.00.$2,995.00Current price is: $2,995.00. Exc. Freight & TaxesThe DX27 Clamshell Rooftop Tent was designed and manufactured in South Africa and brings together The Bush Company’s many years of experience in aluminum fabrication. From The Bush Company’s first hand experience in touring/camping the DX27 Clamshell Rooftop Tent is an innovative product that set new benchmarks in quality, practicality and reliability.
Industry leading features include an extruded and welded aluminum alloy frame, a large rainfly at sides and rear, full length roof mounting rails, plus the convenience of setting up/packing down in under 90 seconds,
Whether you are looking for your first rooftop tent or upgrading your existing setup, the DX27 Clamshell Roof Top has a number of unique features that will leave you knowing that you made the right choice. The key features of the DX27™ are below and the full details are listed in the product specification tab below. To find out why we believe this is the best roof top tent on the market watch the full DX27 product review video here.
To help you fully customise your DX27 Clamshell Rooftop Tent, there’s a wide range of accessories available to really finish off your touring setup, you can check out the full accessory range here.
Key Features
- Aluminium extruded frame with stainless steel fittings.
- Dimensions: Length 2.25m / 7′ 4.6″, Width 1.4m / 4′ 7.1″, Height 278mm / 10.94″
- Max Height (interior, headroom open): 1.4m (4′ 7″)
- Mattress: thickness 70mm / 2.76″ Length 2.13m / 7′, Width 1.28m / 4′ 7″
- Weight: Approximately 94Kg (207lbs) excluding telescopic ladder
- 2.6m Telescopic ladder, second ladder mount and universal fitting kit/brackets supplied as standard
The detailed product specifications of the DX27™ Clamshell Rooftop Tent are listed below.
Unsure which rooftop tent is best for you? Check out the Rooftop Tent Comparison Table for a side by side comparison of the key features of our rooftop tents.
-
Fan Bracket
$27.00 Exc. Freight & TaxesNavigator Outdoor fan bracket is designed to take a Sirocco 12V Fan (sold separately) and can be easily attached to one of the internal cross beams inside the roof of our rooftop tents.
The Scirocco fan slides into the fan bracket when required and can either be removed when the tent is to be closed leaving just the fan bracket in place or adjusted to be flush against the roof of the tent.
-
FRIDGE BARRIER-DS40
$425.00 Exc. Freight & TaxesThe MSA 4X4 FRIDGE BARRIER-DS40 fits the DS40 Drop Slide. It is tough, durable, stylish and delivers the perfect solution for protecting a fridge from any loose gear packed around it.When a fridge is safely secured within a vehicle an MSA 4X4 FRIDGE BARRIER-DS40 separates the fridge from loose gear, adding greater protection from dents and scratches. Items can be packed around the MSA 4X4 FRIDGE BARRIER-DS40 while easy access to the fridge is maintained. No more unpacking the car to access the contents of a fridge. The gloss black powder-coated steel frame provides safety, strength and durability. MSA 4X4 blue anodised logos on both sides create a uniquely recognisable look. The practical side pockets are a great place to store stubbie coolers, cups, bottle openers and any other small items.
The MSA 4X4 range of Fridge Barriers is designed to fit perfectly around the complete range of MSA 4X4 Drop Slides and Straight Slides, while still allowing enough space for ventilation around a fridge to help avoid overheating. Easy to install, lightweight while maintaining the smallest possible footprint, saving valuable storage space within a vehicle. Securely position the fridge power cords away from the movement of the slide with the included bungee cord.
-
FRIDGE BARRIER-DS45
$475.00 Exc. Freight & TaxesThe MSA 4X4 FRIDGE BARRIER-DS45 fits the DS45 Drop Slide. It is tough, durable, stylish and delivers the perfect solution for protecting a fridge from any loose gear packed around it.When a fridge is safely secured within a vehicle an MSA 4X4 FRIDGE BARRIER-DS45 separates the fridge from loose gear, adding greater protection from dents and scratches. Items can be packed around the MSA 4X4 FRIDGE BARRIER-DS45 while easy access to the fridge is maintained. No more unpacking the car to access the contents of a fridge. The gloss black powder-coated steel frame provides safety, strength and durability. MSA 4X4 blue anodised logos on both sides create a uniquely recognisable look. The practical side pockets are a great place to store stubbie coolers, cups, bottle openers and any other small items.
The MSA 4X4 range of Fridge Barriers is designed to fit perfectly around the complete range of MSA 4X4 Drop Slides and Straight Slides, while still allowing enough space for ventilation around a fridge to help avoid overheating. Easy to install, lightweight while maintaining the smallest possible footprint, saving valuable storage space within a vehicle. Securely position the fridge power cords away from the movement of the slide with the included bungee cord.
-
FRIDGE BARRIER-DS50
$485.00 Exc. Freight & TaxesThe MSA 4X4 FRIDGE BARRIER-DS50 fits the DS50 Drop Slide. It is tough, durable, stylish and delivers the perfect solution for protecting a fridge from any loose gear packed around it.When a fridge is safely secured within a vehicle an MSA 4X4 FRIDGE BARRIER-DS50 separates the fridge from loose gear, adding greater protection from dents and scratches. Items can be packed around the MSA 4X4 FRIDGE BARRIER-DS50 while easy access to the fridge is maintained. No more unpacking the car to access the contents of a fridge. The gloss black powder-coated steel frame provides safety, strength and durability. MSA 4X4 blue anodised logos on both sides create a uniquely recognisable look. The practical side pockets are a great place to store stubbie coolers, cups, bottle openers and any other small items.
The MSA 4X4 range of Fridge Barriers is designed to fit perfectly around the complete range of MSA 4X4 Drop Slides and Straight Slides, while still allowing enough space for ventilation around a fridge to help avoid overheating. Easy to install, lightweight while maintaining the smallest possible footprint, saving valuable storage space within a vehicle. Securely position the fridge power cords away from the movement of the slide with the included bungee cord.
