-
TX27 Hardshell Rooftop Tents
$5,950.00 Exc. Freight & TaxesThe TX27 Hardshell Rooftop Tents is the industry’s leading double action hardshell rooftop tents with ultimate comfort, design & convenience. The tent is 1.4m / 4′ 7.1″ wide has 310gsm (+/-10%) double skin canvas, 6 doors/windows providing near panoramic views & 5sqm of ventilation, front, side and rear rainflies, plenty of room for all your bedding. Why wouldn’t you want this tent?
The TX27 Hardshell Rooftop Tents can be set up/packing down in 90 seconds, and incorporates Navigator Outdoor’s many years of experience in aluminum fabrication and first-hand experience in touring/camping. Whether you are looking for your first rooftop tent or upgrading your existing setup, this tent will leave you knowing that you made the right choice. The key specifications of the TX27 Hardshell Rooftop Tents are below and the full details are listed in the product specification tab below. To find out why we believe this is the best roof top tent on the market watch the full TX27 product review video. Are you ready to buy a hardshell rooftop tent online today!
Key Specifications
- Extruded aluminium frame, stainless steel fittings
- Dimensions: Length: Frame 2.25m / 7′ 4.6″, Width: External 1.4m / 4′ 7.1″, Height 348mm / 1’1.7″
- Max Height (exterior, open): Front 1.49m (4′ 10.7″), Rear 1.29m (4’2.8″)
- Max Height (interior, headroom open): Front 1.42m (4′ 8.3″), Rear 1.28m (4’2.4″)
- Weight: Approximately 123Kg / 271lbs, including 8K for mattress & underlay, excluding telescopic ladder
- Mattress: Depth 80mm / 3.15″, Length 2.13m / 7′, Width 1.28m / 4′ 2.4″
- Internal storage when closed (above mattress) 190mm / 7’5″
- 310gsm (+/-10%) double skin canvas throughout tent
- Rechargeable LED light and twin CIG/USB sockets
- 2.6m / 8’6.4″ Telescopic ladder, with pre-mounted ladder mount at front of tent.
- Second ladder mount and universal fitting kit/brackets supplied as standard
Accessories
There are a range of brackets available for fitment of accessories available for Navigator Outdoor tents to really finish off your touring setup. Check out the full accessory range here.
The detailed product specifications of the TX27 Hardshell Rooftop Tents are listed below.
Unsure which rooftop tent is best for you? Check out the Rooftop Tent Comparison Table for a side by side comparison of the key features of our rooftop tents.
-
TX27 MAX Hardshell Rooftop Tent
$6,450.00 Exc. Freight & TaxesThe TX27 MAX Hardshell Rooftop Tent is the widest tent in Navigator Outdoor’s rooftop tent range at 1.6m / 5’2.9″ wide and is the industry’s leading double action hardshell rooftop tent with ultimate comfort, design & convenience. The tent has double skin 310gsm (+/-10%) canvas throughout, 6 doors/windows providing near panoramic views & 5sqm / 53 sq. ft. of ventilation, front, side and rear rainflies, plenty of room for all your bedding. This tent really is the ‘end game’ when it comes to touring and camping.
The TX27 MAX Hardshell Rooftop Tent can be set up/packing down in 90 seconds, and incorporates Navigator Outdoor’s many years of experience in aluminium fabrication and first-hand experience in touring/camping. Due to the size and weight of this tent, it is ideally suited to camper trailers or larger vehicles. The key specifications of the TX27 MAX Hardshell Rooftop Tent are below and the full details are listed in the product specification tab below. To find out why we believe this is the best roof top tent on the market watch the full TX27 MAX product review video, or the install video of a Bruder EXP-4 with TX27 MAX Rooftop Tent.
Key Specifications
- Extruded aluminium frame, stainless steel fittings
- Dimensions: Length: External Frame 2.25m / 7′ 4.6″, Width: 1.6m / 5′ 2.9″, Height 348mm / 1’1.7″
- Max Height (exterior, open): Front 1.49m (4′ 10.7″), Rear 1.29m (4’2.8″)
- Max Height (interior, headroom open): Front 1.42m (4′ 8.3″), Rear 1.28m (4’2.4″)
- Weight: 133Kg / 293lbs, including 9K for mattress & underlay, excluding telescopic ladder
- Mattress: Depth 80mm / 3.15″, Length 2.13m / 7′, Width 1.45m / 4′ 9″
- Internal storage when closed (above mattress) 190mm / 7’5″
- Double skin canvas 310gsm (+/-10%) throughout tent
- Rechargeable LED light and twin CIG/USB sockets
- 2.6m / 8’6.4″ Telescopic ladder, with pre-mounted ladder mount at front of tent.
- Second ladder mount and universal fitting kit/brackets supplied as standard
Accessories
There are a range of brackets available for fitment of accessories available for Navigator Outdoor tents to really finish off your touring setup. Check out the full accessory range here.
The detailed product specifications of the TX27™ MAX Hardshell Rooftop Tent are listed below.
Unsure which rooftop tent is best for you? Check out the Rooftop Tent Comparison Table for a side by side comparison of the key features of our rooftop tents.
-
Ultimate Tool Roll
$80.00 Exc. Freight & TaxesNo need to store your tools in loud toolboxes or tubs that clatter around and distract you while you drive. The MSA 4×4 Ultimate Tool Roll features 18 pockets of various sizes for you to keep all of your tools neat and organised.
The combination of elastics and heavy-duty double-layered 12oz canvas will keep your gear safe in place as well as prevent scratches to your vehicle’s interior.
The attached Velcro strap allows the roll to be wrapped up neatly into a compact size. This makes it easy for you to transport and store tools without taking up unnecessary space.
-
Universal Single Canvas Wall Kit
$299.00 Exc. Freight & TaxesIf you are in need of extra shade, privacy, or protection from the elements for any of Navigator Outdoor’s awnings, you have to consider the Universal Single Canvas Wall Kit.
This wall has a universal design with a width of 2.3m/7’7″ and a maximum height of 2.4m/7’10”. It is made from 260gsm rip stop canvas with a sturdy 600gsm PVC splash skirt with adjustable eyelets, which can be secured using the included pegs. Additionally, the kit includes two aluminium telescopic poles that attach to the awning arms to provide extra support when the wall is in use. The wall has quality zippers on both sides, enabling you to join multiple walls together if desired. To protect your vehicle, there are zip-on sections on each side that prevent the zipper from scratching your car’s surface.
The wall itself weighs 3.4Kg/7lbs 8oz, while the total weight, including the poles and pegs, is 5.4Kg/11lbs 10oz.
-
USA COLORADO 2015-22 Complete Drawer Kit
$3,307.00 Exc. Freight & TaxesSICK OF SHOVING EVERYTHING LOOSELY IN THE BACK OF YOUR VEHICLE? WHY NOT MAKE YOUR LIFE A LITTLE MORE ORGANISED WITH THE MSA 4X4 EXPLORER ALUMINIUM STORAGE DRAWER SYSTEM?
-
USA FORD RANGER 2019-2023 Complete Drawer Kit
$3,307.00 Exc. Freight & TaxesSICK OF SHOVING EVERYTHING LOOSELY IN THE BACK OF YOUR VEHICLE? WHY NOT MAKE YOUR LIFE A LITTLE MORE ORGANISED WITH THE MSA 4X4 EXPLORER ALUMINIUM STORAGE DRAWER SYSTEM?
-
USA JEEP GLADIATOR 2019- Current Complete Drawer Kit
$3,342.00 Exc. Freight & TaxesSICK OF SHOVING EVERYTHING LOOSELY IN THE BACK OF YOUR VEHICLE? WHY NOT MAKE YOUR LIFE A LITTLE MORE ORGANISED WITH THE MSA 4X4 EXPLORER ALUMINIUM STORAGE DRAWER SYSTEM?
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology offering a smoother opening under heavy loads. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed with aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
- 100% Drawer extension for complete access
- Patented “Stay-Open Block”
- Internal LED Light Strip
- Safe and secure lock system
- Dust resistant seal
- Stainless steel fasteners
- Removable wing and face panels
INCLUDES:
- Complete wing kits
- Cargo Barrier mounting points
- Child restraint points
- MSA 4X4’s Lifetime Guarantee
-
USA LEXUS 470 2002-2009 Complete Drawer Kit
$2,819.00 Exc. Freight & TaxesSICK OF SHOVING EVERYTHING LOOSELY IN THE BACK OF YOUR VEHICLE? WHY NOT MAKE YOUR LIFE A LITTLE MORE ORGANISED WITH THE MSA 4X4 EXPLORER ALUMINIUM STORAGE DRAWER SYSTEM?
-
USA TACOMA 2016-Current Complete Drawer Kit 5FT
$3,468.00 Exc. Freight & Taxes*For 5FT Bed Length
SICK OF SHOVING EVERYTHING LOOSELY IN THE BACK OF YOUR VEHICLE? WHY NOT MAKE YOUR LIFE A LITTLE MORE ORGANISED WITH THE MSA 4X4 EXPLORER ALUMINIUM STORAGE DRAWER SYSTEM?
MSA 4X4’s Storage Drawer Systems are designed with a patented slide technology offering a smoother opening under heavy loads. The entire drawer extends further from the frame, allowing 100% access to the drawers. No more hard-to-reach items at the back! MSA 4X4’s Storage Drawer Systems are constructed with aluminium and have anodised aluminium components. Super-strong, lightweight and comes with stainless steel fasteners used throughout for a rust-free, corrosion resistance lifetime of use.
The patented “Stay-Open Block” allows the drawer to remain in an open position even on a 30-degree slope. They also feature an LED Light Strip that activates at full extension and has a manual override switch. A 100% safe and secure lock system that can not be levered open from underneath, is an exceptional security measure. Dust resistant seals around front panels ensure all the items stored inside stay clean and dust free. Flush-fitting wing kits are available for most 4WDs and utes, creating additional storage space between the Storage Drawer System and the inner sides of the car. Access to the space is gained through removing the wing and face panels. The reinforced wing kit brackets provide a fully supported base for fridge slides to be mounted onto the wing panels, allowing for more placement options.
The impact force of an unsecured item, within a vehicle during an accident, can be twenty to thirty times its static weight. Therefore greatly increasing the potential of occupant injuries. MSA 4X4’s Storage Drawer Systems, and the attachments that come with them (cargo barrier mount points and child restraint points), have been crash-tested and are fully ADR compliant. Tested to ADR3/02, ADR34/01 and ADR42 and passed all the requirements prescribed by the ADRs and AS/NZS, without any structural weaknesses or degradation of the system.
FEATURES:
- 100% Drawer extension for complete access
- Patented “Stay-Open Block”
- Internal LED Light Strip
- Safe and secure lock system
- Dust resistant seal
- Stainless steel fasteners
- Removable wing and face panels
INCLUDES:
- Complete wing kits
- Cargo Barrier mounting points
- Child restraint points
- MSA 4X4’s Lifetime Guarantee
-
Wide Ladder Mount Bracket
The Wide Ladder Mount Bracket is designed to mount to the side of Navigator Outdoor rooftop tents that have ezi-slot channels in the side of the frame. The bracket spaces the receiver for the telescopic ladder 70mm from the side of the tent.
-
Wide Ladder Mount Bracket (2 Bolt)
$65.00 Exc. Freight & TaxesThe Wide Ladder Mount Bracket is designed to mount to the side of Navigator Outdoor rooftop tents that have ezi-slot channels in the base frame of the tent. The bracket spaces the receiver for the telescopic ladder 70mm from the side of the tent. There are two variants for this mount:
- Double Bolt Ladder Mount – this is the latest version of Navigator Outdoor ladder mount styles, helps to prevent the ladder from rocking side to side.
- Single Bolt Ladder Mount – this is the original version of Navigator Outdoor ladder mount styles.
The Wide Ladder Mount Bracket is ideal for situations where the edge of the tent is recessed inside the edge of a canopy or where you need the ladder to clear something on your vehicle.
The Wide Ladder Mount Bracket is made from stainless steel in a powder coat black finish to match the rooftop tents. The bracket is supplied with stainless steel M8 pan head bolts and nyloc nuts and comprehensive fitting instructions.
NOTE: the plate that mounts to the ladder itself is sold separately here.
-
Z-Rails
$225.00 Exc. Freight & TaxesThe Z-Rails are an ideal choice for mounting your rooftop tent to the top of a canopy. They will raise your rooftop tent by 36.5mm/1 ⁷/₁₆” to avoid the cab or roof rack of your vehicle. The Z-Rails 35mm are also compatible with roof racks that feature a raised lip around the edge, like Front Runner racks.
Constructed from 5mm thick steel powder coated black, these CNC machined Z-Rails measure 1,702mm/5″7 ¹/₆₄” in length, 36.5mm/1 ⁷/₁₆” in height, and 73mm/2 ⁷/₈” in width, and they are approximately 4Kg/8lb 13oz each.
