-
180 XT MAX Awning
$1,495.00 Exc. Freight & TaxesThe 180 XT MAX™ Awning is the ultimate solution as a free standing shade awning in terms of massive shade coverage (8.53m2 / 91.82ft2), wind resistance, and shares the same strength and durability as our famous 270 XT Awning and 270 XT MAX Awning.
The 180 XT MAX™ Awning is 90.5 inches long (2.3m) when packed up weighs only 57.3lbs (26Kg) and can be easily mounted to most roof racks or heavy duty load bars using our Heavy Duty L Brackets (included with the awning) or to our Roof Top Tents using the appropriate awning to tent bracket (sold separately).
Around the inside edge of the awning is a 50mm / 2″ thick triple stitched velcro strip which can be used to attach the optional awning walls (sold separately) enabling you to fully enclose the area to provide protection from the elements or additional privacy.
Fitting the 180 XT MAX™ Awning
The 180 XT MAX™ Awning frame requires a fitment bracket attached to the stainless steel sections no more than 200mm / 7 ⁷/₈inch from each end. The awning is not suitable to be fitted to a roof rack shorter than 1.9m / 74.8inches in length or to load bars where the width from front to rear is less than 1.9m / 74.8inches. When using our Heavy Duty L Brackets (supplied with the awning) for mounting the 180 XT MAX™ awning, we recommend using one pair of the brackets, with one at each end.
-
180 XT MAX Awning Wall Kit
$1,150.00 Exc. Freight & TaxesThe 180 XT MAX Awning Wall Kit is the perfect solution if you want more privacy & protection from the elements for your 180 XT MAX Awning set-up,
The 180 XT MAX Awning Wall Kit comes as a complete kit with 3 main walls and a fourth that can be used to screen off either the front or rear arm area.
The kit comes wth 4 aluminium telescopic poles.
-
270 XT Awning Mk2
$1,495.00 Exc. Freight & TaxesThe 270 XT Awning Mk2 sets new benchmarks for a free standing shade awning in terms of overall strength, wind resistance and durability. The 270 XT Awning Mk2 provides an incredible 8sqm (86sqft) of shade around your 4WD for you to set up your camp kitchen, swags or just a shaded seating/chill out area.
The awning is 2.3m / 90.5 inches in length, weighs only 27.8Kg / 61.3lbs and can easily be set up by one person in about 30 seconds and the pack down is just as simple.
The awning is available in either a Left Hand Side (driver’s side in USA) or Right Hand Side (passenger side in USA) configuration, please select which version you require from the drop down menu below.
There are 2 Heavy Duty L brackets supplied with the 270 XT Awning Mk2. One fitment bracket must be attached to the stainless steel head stock at the hinged end of the awning no more than 200mm (7 ⁷/₈inch) from the hinged end, The second bracket must be mounted no less than 1.3m (4′ 3″) from the bracket at the hinged end. To mount the awning to one of our rooftop tents you will need an Awning To Tent bracket which are sold separately.
-
270 XT Awning Wall Kit
$1,150.00 Exc. Freight & TaxesIf you’re looking to enhance privacy and shield yourself from the elements with your 270 XT Awning set-up, the ideal solution is the 270 XT Awning Wall Kit. This kit includes 4 main walls and 5 aluminium telescopic poles that conveniently fit into pre-drilled holes in the trussed awning arms, offering added stability and support for the walls.
Check out the full product review video to see the kit in action and the product description below for more details.
-
270 XT MAX Awning Mk2
$1,850.00 Exc. Freight & TaxesThe 270 XT MAX Awning Mk2 sets a new standard for a free standing shade awning with massive shade coverage (+/-12m2 / 129ft2), great wind resistance and shares the same strength and durability as the famous 270 XT Awning.
The 270 XT MAX Awning Mk2 is 2.3m (7’6″) long when packed away, weighs only 33.5Kg (74lbs) and can set up or packed away by one person in under 60 seconds.
The awning is available in either a Left Hand Side (driver’s side in USA) or Right Hand Side (passenger side in USA) configuration, please select which version you require from the drop down menu below.
The 270 XT MAX Awning Mk2 requires a fitment bracket attached to the stainless steel head stock at each end of the awning frame no more than 200mm (7 ⁷/₈inch) from each end, there are 3 Heavy Duty L brackets supplied with the awning. The awning is not suitable to be fitted to a roof rack shorter than 1.9m (75″) in length or to load bars where the width from front to rear is less than 1.9m (75″). We recommend having a third bracket positioned in the middle of the awning.
To mount the awning to one of our rooftop tents you will need an Awning To Tent bracket which are sold separately.
-
270 XT MAX Awning Wall Kit
$1,250.00 Exc. Freight & TaxesIf you’re looking to enhance privacy and shield yourself from the elements with your 270 XT MAX Awning set-up, the ideal solution is the 270 XT MAX Awning Wall Kit. This kit includes 5 main walls and an additional 6th wall, which can be used to create a partition in either the front arm area or beneath the awning. The kit also provides six aluminium telescopic poles that conveniently fit into pre-drilled holes in the trussed awning arms, offering added stability and support for the walls.
Check out the full product review video to see the kit in action and the product description below for more details.
-
4WD Gear Bag-Large
$30.00 Exc. Freight & TaxesThe MSA 4X4 4WD Gear Bags are a great solution for keeping four wheel drive gear organised, yet still easily accessible. This 4WD Gear Bag-Large is a heavy-duty universal bag, perfect for storing jumper cables, tie-down straps, recovery gear and more.
FEATURES:
- Dimensions in (cm): 14(w) x 24(L) x 26 (H)
- Heavy-duty Teflon impregnated waterproof canvas
- Moulded rubber carry handle
- Velcro strips to secure the bag closed
- Versatile use
-
4WD Gear Bag-Small
$28.00 Exc. Freight & TaxesThe MSA 4X4 4WD Gear Bags are a great solution for keeping four wheel drive gear organised, yet still easily accessible. This 4WD Gear Bag-Small is a heavy-duty universal bag, perfect for storing jumper cables, tie-down straps, recovery gear and more.
FEATURES:
- Dimensions in (cm): 7(w) x 24(L) x 26 (H)
- Heavy-duty Teflon impregnated waterproof canvas
- Moulded rubber carry handle
- Velcro strips to secure the bag closed
- Versatile use
-
Accessory To Tent Bracket Set – Outhouse
$55.00 Exc. Freight & TaxesThe Accessory To Tent Bracket Set is ideal for mounting your Navigator Outdoor Outhouse shower tent to your rooftop tent, or mounting other accessories or shower tents to your rooftop tent.
The bracket is 147mm (5 ²⁵/₃₂”) high and the pitch of the mounting bolts that attach to a tent is 60mm max or 46mm min and are 105mm (4 ⁹/₆₄”) apart.
The bracket is made from stainless steel and has been CNC laser cut and folded and finished in a durable powder coat finish. The brackets are supplied with a complete stainless bolts and nyloc nuts for assembly.
-
Awning Bag Replacement
$200.00 Exc. Freight & TaxesIf you have damaged your Navigator Outdoor awning bag don’t panic! We have Awning Bag Replacement for all of our awnings.
Navigator Outdoor awning bags are 460gsm (16.2oz) poly-cotton rip-stop canvas with YKK Zippers. In contrast to PVC covers, the canvas allows the awning to breath while keeping it dust/dirt free and moisture is able to wick out through the zipper reducing the risk of mould or mildew.
The rip-stop material on the bag also reduces the risk of large running tears in the bag as a result of contact with tree branches, and the front and rear sections of the bag have a double layer of canvas providing extra protection.
Select which awning bag you need from the drown list.
-
Awning Heavy Duty L Bracket
$155.00 Exc. Freight & TaxesNavigator Outdoor Awnings are supplied with Awning Heavy Duty L Bracket (2 with the 180 XT MAX and 270 XT, and 3 with the 270 XT MAX). You may want to have additional brackets depending on the fitment and the use of the vehicle/awning, these are sold in pairs.
For any awning it is important that the bracket can support the weight of the awning in off-road conditions and when in use, especially the larger 270 degree awnings. The Heavy Duty L Bracket has been designed to suit Navigator Outdoor awnings when fitted to load bars or a roof rack. The bottom arm which attaches to the load bar or roof-rack is 310mm (12 ¹³/₆₄”) long and 81mm (3 ³/₁₆”) wide with a range of holes and slot options for attachment, this longer arm is ideal for fitment to roof racks with wider slats where the attachment points are further apart such as a Rhino Pioneer Platform Rack. The vertical arm of the brackets can be configured in three positions enabling the height above the rack to be adjusted from either 225mm (8 ⁵⁵/₆₄”), 165mm (6 ¹/₂”) or 105mm (4 ⁹/₆₄”).
The bracket is made from stainless steel and has been CNC laser cut and folded and finished in a durable powder coat finish. The brackets have heavy duty gussets in the corner to withstand the rigours of off-road travel, when fitted the gusset of the bracket must be facing upwards and not be installed further out than the edge of the rack. The brackets are supplied with a complete set of stainless steel pan head and hex bolts and nyloc nuts for assembly.
-
Awning Brackets / Awnings & Accessories / Rooftop Tent Accessories & Brackets / Rooftop Tents & Accessories
Awning To Tent Bracket 4 Piece – LX27
$159.00 Exc. Freight & TaxesThe Awning To Tent Bracket 4 Piece is designed to be easily mounted to The Bush Company’s LX27 Clamshell Rooftop Tent by using the ‘Ezi Slot’ channels in the base frame of the tent.
The Awning To Tent Bracket 4 Piece is universal so can be mounted to the left or right side of the tent. For 270 awnings such as The Bush Company’s 270 XT™ Awning and especially the 270 XT MAX™ Awning it is important that the awning bracket can support the weight of the awning in off-road conditions, but can also cope with the twisting motion of the awning on its hinge when in use.
NOTE: if you need to mount the awning bracket pointing upwards due to your vehicle configuration, we recommend selecting the Spring Road Adapter with the awning bracket. The Spring Rod Adapter eliminates the need to bend a ‘dog leg’ in the spring steel pole of your tent to clear the awning when deployed. The Awning To Tent Bracket 4 Piece is only suitable for the LX27 rooftop tent.
-
AX27 Clamshell Rooftop Tent
$4,495.00 Exc. Freight & TaxesThe AX27 Clamshell Rooftop Tent is the perfect blend of comfort, design, and convenience. Being able to store bedding and other items inside make set-up and pack-down processes quick and easy. It is constructed with a super strong extruded aluminium alloy frame, double layered canvas skin, large rainfly, and a dual layered 80mm mattress for optimal comfort. Additionally, there is an array of accessories available for you to customise your AX27 Clamshell Rooftop Tent and complement your touring setup. To find out which of our rooftop tents is best for you, refer to the Rooftop Tent Comparison Table , which provides a side by side comparison of the key features of our rooftop tents.
To help you fully customise your AX27™ Clamshell Rooftop Tent, there’s a wide range of accessories available to really finish off your touring setup, you can check out the full accessory range here.
-
Bottle Opener Universal
$13.00 Exc. Freight & TaxesThe Bottle Opener Universal is designed to mount to the side of Navigator Outdoor rooftop tents that have ezi-slot channels in the sides of the frame of Navigator Outdoor”s rooftop tents..
The Bottle Opener Universal is made from stainless steel in a powder coat black finish to match the rooftop tents.
The bracket is supplied with stainless steel M8 pan head bolts and nyloc nuts and comprehensive fitting instructions.
-
Bush Cook Cutlery Roll
$69.00 Exc. Freight & TaxesThis Bush Cook Cutlery Roll is typical of the high quality and practical camping products that Navigator Outdoor is renowned for. The roll is made from heavy duty ripstop canvas and has two plastic clips with webbing loops and carry handle. The cutlery is all made in South Africa from high quality stainless steel that won’t degrade or rust.
The cutlery roll has dedicated pockets to keep the cutlery secure and a large flap that folds down over the cutlery to prevent it from sliding out. The roll includes cutlery for 6 people and comes with a standard knife, a fork, a dessert spoon, spoon and a strong steak knife.
- 6 Standard knives
- 6 Steak Knives
- 6 Forks
- 6 Dessert Spoons
- 6 Tea Spoons
- Heavy duty ripstop canvas
- Strong plastic clips and webbing straps/carry handle
-
Camping Dining Set 6 Place
$235.00 Exc. Freight & TaxesThe Canopy Shelf Dining Set 6 Place from Navigator Outdoor is a fantastic solution to maximise the storage in your canopy gull wing shelves, and incorporates all of the practical design features and quality manufacturing that Navigator Outdoor products are renowned for.
The bag is made from 420g thick rip stop canvas and has high quality YKK zippers. The dimensions of the bag are: Height 460mm, Width 600mm, Depth at Base 300mm, Depth at Top 100mm. All of the crockery is made from high quality melamine and is microwave safe, there are dedicated storage holders for your dinner plates (these are full size meat platters), side plates, bowls, mugs and tall glasses (real glass), as well as the 6 person stainless steel cutlery set which includes additional steak knives. The adjustable shoulder strap makes it easy to transport the whole set to your camping spot.
- Outer Bag Material – heavy rip stop canvas, reinforced back, base and sides.
- Inner Bag Material – heavy duty ripstop canvas sides with clear plastic lid.
- Shoulder Strap
- Zips – quality YKK fasteners
- Quantity – 4 bags, 2 large, 2 medium
- Dimensions – Depth Base 300mm Top 100mm, 460mm W, 600mm H
