-
Shovel Mount Bracket
$60.00 Exc. Freight & TaxesYou can use the Shovel Mount bracket to securely transport either a long or short handle shovel on the side of your Navigator Outdoor rooftop tent. The bracket can be easily fitted to the base or lid of our rooftop tents using the ‘Ezi-Slot’ channels integrated into the tent’s frame. Crafted from stainless steel with a sleek black powder coat finish, the bracket is also adjustable to accommodate various shovel handle widths.
-
Shower Tent // Outhouse
$695.00 Exc. Freight & TaxesThe Outhouse from Navigator Outdoor provides a perfect solution for privacy when showering, using the toilet, or just getting changed. The drop height is adjustable making it perfect for almost any height vehicle.
Easy to set up and pack down, the Outhouse has a range of great features that set it apart from the rest.
- 260gsm polyester rip stop acrylic infused, mould and mildew resistant canvas.
- Unique swing out door allows easy access.
- Built in canvas roof and adjustable webbing straps to adjust drop height.
- Separate heavy duty PVC floor with built in drain holes.
- Large rear access.
- Two movable pockets for shampoo bottles etc.
- Heavy duty PVC storage bag.
- YKK zips on shower entrance and bag.
The Outhouse can be easily mounted to roof racks using our Low Profile L Bracket, or to the side of your rooftop tent using the Outhouse To Tent Bracket. These brackets must be ordered separately as they are not included with the Outhouse.
-
Sirocco 12V Fan Mount Plate (LX27)
Price range: $27.00 through $159.00 Exc. Freight & TaxesThe Sirocco 12V Fan Mount Plate is a great way to mount a fan to your LX27 rooftop tent. If you are looking for a way to keep cool during those hot summer night while on the road, look no further than the Sirocco 12V Fan. This powerful fan is perfect when you need a reliable source of ventilation.
Navigator Outdoor Sirocco 12V Fan Mount Plate can be easily attached (all mounting hardware is provided) to pre-installed rivnuts in the beams of the roof of Navigator Outdoor LX27 rooftop tents. The Scirocco fan can then be easily slid into place when required and removed when the tent is to be closed leaving.. The mount plate also provides a place to mount your tents magnetic tri-colour rechargeable light.
The Scirocco Fan is supplied with cables to connect it to your tens power sockets, these include a 2.5m extension with a male and female cig socket that can be run neatly up the zipped canvas channels on the inside of your tent, and an 86mm cable with a male cig socket that plugs into the female end of the extension cable and also connects to the terminals on your fan.
-
Solar Cable Protector
$24.00 Exc. Freight & TaxesThe Solar Cable Protector provides the perfect solution to protect your solar panel wiring from damage or getting caught on tree branches in the bush.
The Solar Cable Protector has been designed to mount easily to the hinged end of your Navigator Outdoor Rooftop tent on either side.
-
Solar Panel Bracket (AX27, DX27)
$125.00 Exc. Freight & TaxesIf you’re looking to mount solar panels on the roof of your tent, the Solar Panel Bracket is an ideal solution. Constructed from stainless steel with a black powder-coat finish and sold as a pair, the brackets mount to the rails running along the roof and are designed to securely hold your solar panels in place.
For mounting your panels, all you need to do drill holes into the frame of your panels for the rivets, which are supplied with the bracket. Additionally, the bracket ensures that there is still air circulation underneath the panel, helping to maintain the panel’s output efficiency.
NOTE: these brackets only suit the AX27 and DX27 rooftop tents, not the TX27 or TX27 MAX.
-
Solar Panel To Load Bar Bracket Set
$48.00 Exc. Freight & TaxesThe Solar Panel To Load Bar Bracket Sett is perfect for mounting solar panels to your adjustable load bars on your rooftop tent.
The brackets mount securely to Navigator Outdoor load bar and you then secure your panel to the bracket using the pop rivets provided with the bracket.
The Solar Panel To Load Bar Bracket Set is suitable for use with our Adjustable Load Bar that mount to the side of your Navigator Outdoor tent, or can be used with our standard Rooftop Tent Load Bars but require them to have the High Foot Mount fitted. fitted
-
Spring Rod Adapter
$32.00 Exc. Freight & TaxesThe Spring Rod Adapter mounts to the Navigator Outdoor’s Tent To Awning Bracket for tents that have that have the ‘Ezi-Slot’ channels built into the frame. Spring Rod Adapter bracket only required if the tent to awning bracket is mounted pointing upwards – usually done to avoid the vehicle doors from rubbing on the awning bag.
The Spring Rod Adapter is made from stainless steel in a powder coat black finish to match the rooftop tents. The bracket is supplied with stainless steel M8 pan head bolts and nyloc nuts and comprehensive fitting instructions.
The adapter is available in a left and right hand version.
-
Strap Hook Bracket
$18.00 Exc. Freight & TaxesThe Strap Hook Bracket is designed to mount to the side of Navigator Outdoor rooftop tents that have ezi-slot channels in the side of the frame. The bracket provides a low profile, convenient point to attach awning straps when deploying your awning.
The Strap Hook Bracket is made from stainless steel in a powder coat black finish to match the rooftop tents. The bracket is supplied with stainless steel M8 pan head bolts and nyloc nuts and comprehensive fitting instructions.
-
Tent To Awning Bracket
$168.00 Exc. Freight & TaxesThe Tent To Awning Bracket is designed for Navigator Outdoor’s rooftop tents that have the ‘Ezi Slot’ channels in the frame of the tent such as the AX27, DX27, TX27 and TX27 MAX. This bracket provides the support necessary to withstand the forces generated by free standing awnings.
The Tent To Awning Bracket is universal so can mounted to the left or right hand side of the tent.
IMPORTANT: the Tent To Awning Bracket can be mounted with the brackets pointing upwards or downwards. If you need to mount the awning bracket pointing upwards due to your vehicle configuration, you should also purchase the Spring Road Adapter with the awning bracket as this prevents possible damage to the awning as a result of contact with the spring steel pole for the rainfly of your tent.
You can view the video of how to install the Awning Bracket here.
-
Wide Ladder Mount Bracket (2 Bolt)
$65.00 Exc. Freight & TaxesThe Wide Ladder Mount Bracket is designed to mount to the side of Navigator Outdoor rooftop tents that have ezi-slot channels in the base frame of the tent. The bracket spaces the receiver for the telescopic ladder 70mm from the side of the tent. There are two variants for this mount:
- Double Bolt Ladder Mount – this is the latest version of Navigator Outdoor ladder mount styles, helps to prevent the ladder from rocking side to side.
- Single Bolt Ladder Mount – this is the original version of Navigator Outdoor ladder mount styles.
The Wide Ladder Mount Bracket is ideal for situations where the edge of the tent is recessed inside the edge of a canopy or where you need the ladder to clear something on your vehicle.
The Wide Ladder Mount Bracket is made from stainless steel in a powder coat black finish to match the rooftop tents. The bracket is supplied with stainless steel M8 pan head bolts and nyloc nuts and comprehensive fitting instructions.
NOTE: the plate that mounts to the ladder itself is sold separately here.
