-
MAXTRAX Load Bar Bracket
$85.00 Exc. Freight & TaxesThe MAXTRAX Load Bar Bracket is designed to securely mount your MAXTRAX or any other recovery track brand onto Navigator Outdoor’s Rooftop Tent Load Bars (load bars sold separately). Crafted from CNC laser cut and folded stainless steel, this bracket comes with stainless steel bolts, nuts, and washers, including 80mm M10/ ³/₈” stainless bolts and large wing nuts capable of holding up to 4 recovery tracks. Additionally, the bracket is compatible with MAXTRAX quick release pins, these are not included. Its sleek black powder coat finish adds a stylish touch, with Navigator Outdoor’s brand name laser cut into the arms.
-
MAXTRAX Side Mount Bracket
$99.00 Exc. Freight & TaxesThe MAXTRAX Side Mount Bracket allows you to attach your MAXTRAX or any other recovery track to the side of Navigator Outdoor’s rooftop tents that have the ‘Ezi-Slots’ frames.
This pair of brackets is made from high-quality stainless steel that has been CNC laser cut and folded, and it is coated with a sleek satin black powder finish. The brackets come with all the necessary stainless steel bolts, nuts, and washers, including 80mm long M10/³/₈” stainless bolts and large wing nuts that can hold up to 4 recovery tracks. The bracket is also compatible with MAXTRAX quick release pins, although these are not included. To add a stylish touch, Navigator Outdoor’s brand name is laser cut into the arms of the bracket.
-
Outhouse Low Profile L-Bracket
$100.00 Exc. Freight & TaxesThe Outhouse To Tent Bracket Set is designed for mounting your Navigator Outdoor Outhouse Ensuite to a rooftop tent.
The bracket is 147mm (5 ²⁵/₃₂”) high and the pitch of the mounting bolts that attach to a tent is 60mm max or 46mm min and are 105mm (4 ⁹/₆₄”) apart.
The bracket is made from stainless steel and has been CNC laser cut and folded and finished in a durable powder coat finish. The brackets are supplied with a complete stainless bolts and nyloc nuts for assembly.
-
Rooftop Storage Gear Bag 160L
$125.00 Exc. Freight & TaxesThe Rooftop Storage Gear Bag 160L by is great for storing items on your roof or roof rack that you want to protect from the elements. The Rooftop Storage Gear Bag 160L has been designed to fit three of Navigator Outdoor’s Pioneer Boxes perfectly, but you can store pretty much anything in it. The dimensions of the Gear Bag are 1.2m long, 51cm wide and 26cm high, with a capacity of 160L.
Built in strapping points for tie down ratchet straps which are not included, allow you to anchor your load securely and safely with the straps running either length ways or sideways across the bag.
The Rooftop Storage Gear Bag 160L canvas is our heavy duty 460gm rip stop canvas and there is a full PVC floor providing extra protection. The zip is a high quality YKK zipper and the large overlapping flap is secured with a 25mm wide strip of heavy duty Velcro. As the bag is canvas we cannot guarantee that it is 100% waterproof due to stitching etc. , but the bag is about as water resistant as you can get.
NOTE: ratchet straps are not included with the bag.
-
Rooftop Tent Load Bars
$185.00 Exc. Freight & TaxesThe Rooftop Tent Load Bars, sold as a pair, are designed to fit flush with the roof rails of Navigator Outdoor rooftop tents. This provides extra tie-down options and protection for the roof.
The bars are made of extruded aluminium with stainless steel end caps, mounting feet, bolts, and nuts. They have a matte black finish and have been engineered and extruded on three sides to accept M8 (5/16″) bolts or nuts, so you can easily attach eye bolts for tie-down straps or other accessories.
If you want to fit solar panels as well as load bars, you can use the optional load bar high foot mount to raise the load bars, allowing you to store equipment on the roof without resting on your solar panels.
NOTE – these do not fit the TX27 or TX27 MAX Tents
-
Rooftop Tent Organiser
Price range: $98.00 through $110.00 Exc. Freight & TaxesLooking for extra storage inside your Navigator Outdoor rooftop tent? You can add additional Rooftop Tent Organisers. Each organiser is crafted from 300g ripstop polyester and features a zipped pocket at each end and a large central pouch. For easy fitment, the rear of the organiser is lined with heavy duty Velcro. This will provide you with an out of the way yet accessible storage solution for items ranging from clothes to torches.
-
Shovel Mount Bracket
$60.00 Exc. Freight & TaxesYou can use the Shovel Mount bracket to securely transport either a long or short handle shovel on the side of your Navigator Outdoor rooftop tent. The bracket can be easily fitted to the base or lid of our rooftop tents using the ‘Ezi-Slot’ channels integrated into the tent’s frame. Crafted from stainless steel with a sleek black powder coat finish, the bracket is also adjustable to accommodate various shovel handle widths.
-
Shower Tent // Outhouse
$695.00 Exc. Freight & TaxesThe Outhouse from Navigator Outdoor provides a perfect solution for privacy when showering, using the toilet, or just getting changed. The drop height is adjustable making it perfect for almost any height vehicle.
Easy to set up and pack down, the Outhouse has a range of great features that set it apart from the rest.
- 260gsm polyester rip stop acrylic infused, mould and mildew resistant canvas.
- Unique swing out door allows easy access.
- Built in canvas roof and adjustable webbing straps to adjust drop height.
- Separate heavy duty PVC floor with built in drain holes.
- Large rear access.
- Two movable pockets for shampoo bottles etc.
- Heavy duty PVC storage bag.
- YKK zips on shower entrance and bag.
The Outhouse can be easily mounted to roof racks using our Low Profile L Bracket, or to the side of your rooftop tent using the Outhouse To Tent Bracket. These brackets must be ordered separately as they are not included with the Outhouse.
-
Slat Extension Brackets
$112.00 Exc. Freight & TaxesThe Slat Extension Brackets are designed to fit Navigator Outdoor Classic Series tent range to a vehicle with misaligned supporting load bars. This aluminium ‘Slat Extension’ mimics the design of the tent’s underside extrusions, fitting between two to create a ‘bridge’ for the load bar. All the necessary fittings to attach the slat to the extrusion are included with the bracket. It’s easy to install and only requires a 13mm/³³/₆₄” socket or spanner.
-
Solar Panel Bracket (AX27, DX27)
$125.00 Exc. Freight & TaxesIf you’re looking to mount solar panels on the roof of your tent, the Solar Panel Bracket is an ideal solution. Constructed from stainless steel with a black powder-coat finish and sold as a pair, the brackets mount to the rails running along the roof and are designed to securely hold your solar panels in place.
For mounting your panels, all you need to do drill holes into the frame of your panels for the rivets, which are supplied with the bracket. Additionally, the bracket ensures that there is still air circulation underneath the panel, helping to maintain the panel’s output efficiency.
NOTE: these brackets only suit the AX27 and DX27 rooftop tents, not the TX27 or TX27 MAX.
-
Spring Rod Adapter
$32.00 Exc. Freight & TaxesThe Spring Rod Adapter mounts to the Navigator Outdoor’s Tent To Awning Bracket for tents that have that have the ‘Ezi-Slot’ channels built into the frame. Spring Rod Adapter bracket only required if the tent to awning bracket is mounted pointing upwards – usually done to avoid the vehicle doors from rubbing on the awning bag.
The Spring Rod Adapter is made from stainless steel in a powder coat black finish to match the rooftop tents. The bracket is supplied with stainless steel M8 pan head bolts and nyloc nuts and comprehensive fitting instructions.
The adapter is available in a left and right hand version.
-
Strap Hook Bracket
$18.00 Exc. Freight & TaxesThe Strap Hook Bracket is designed to mount to the side of Navigator Outdoor rooftop tents that have ezi-slot channels in the side of the frame. The bracket provides a low profile, convenient point to attach awning straps when deploying your awning.
The Strap Hook Bracket is made from stainless steel in a powder coat black finish to match the rooftop tents. The bracket is supplied with stainless steel M8 pan head bolts and nyloc nuts and comprehensive fitting instructions.
-
Tent To Awning Bracket
$168.00 Exc. Freight & TaxesThe Tent To Awning Bracket is designed for Navigator Outdoor’s rooftop tents that have the ‘Ezi Slot’ channels in the frame of the tent such as the AX27, DX27, TX27 and TX27 MAX. This bracket provides the support necessary to withstand the forces generated by free standing awnings.
The Tent To Awning Bracket is universal so can mounted to the left or right hand side of the tent.
IMPORTANT: the Tent To Awning Bracket can be mounted with the brackets pointing upwards or downwards. If you need to mount the awning bracket pointing upwards due to your vehicle configuration, you should also purchase the Spring Road Adapter with the awning bracket as this prevents possible damage to the awning as a result of contact with the spring steel pole for the rainfly of your tent.
You can view the video of how to install the Awning Bracket here.
-
Universal Single Canvas Wall Kit
$299.00 Exc. Freight & TaxesIf you are in need of extra shade, privacy, or protection from the elements for any of Navigator Outdoor’s awnings, you have to consider the Universal Single Canvas Wall Kit.
This wall has a universal design with a width of 2.3m/7’7″ and a maximum height of 2.4m/7’10”. It is made from 260gsm rip stop canvas with a sturdy 600gsm PVC splash skirt with adjustable eyelets, which can be secured using the included pegs. Additionally, the kit includes two aluminium telescopic poles that attach to the awning arms to provide extra support when the wall is in use. The wall has quality zippers on both sides, enabling you to join multiple walls together if desired. To protect your vehicle, there are zip-on sections on each side that prevent the zipper from scratching your car’s surface.
The wall itself weighs 3.4Kg/7lbs 8oz, while the total weight, including the poles and pegs, is 5.4Kg/11lbs 10oz.
-
Z-Rails
$225.00 Exc. Freight & TaxesThe Z-Rails are an ideal choice for mounting your rooftop tent to the top of a canopy. They will raise your rooftop tent by 36.5mm/1 ⁷/₁₆” to avoid the cab or roof rack of your vehicle. The Z-Rails 35mm are also compatible with roof racks that feature a raised lip around the edge, like Front Runner racks.
Constructed from 5mm thick steel powder coated black, these CNC machined Z-Rails measure 1,702mm/5″7 ¹/₆₄” in length, 36.5mm/1 ⁷/₁₆” in height, and 73mm/2 ⁷/₈” in width, and they are approximately 4Kg/8lb 13oz each.
